Perforated Acoustic Panels

The structure of hole perforations in front and back is based on scientific calculations and acoustic principal. Wooden perforated acoustic panels have high sound absorptions performances in low and mid frequencies. These has strong selection on the sound spectrum and particular great performance on mid and low frequency. When equipped with back acoustic insulation, the performance increased for mid and high frequency. Hole diameter and pitch for perforated panels can be customized as per designer requirements. These are used for strong constructions for impact resistances and excellent décors.

Grooved Acoustic Panels

In many spaces, flat reflective surfaces can cause interfering reflections and excessive reverberation which can corrupt work environments, meeting and gathering areas, music quality and speech intelligibility to name a few. One of the most attractive approaches to controlling noise, sound reflections and excess reverberation is to utilize sound absorbing natural wood wall and ceiling panels. Grooved Panel is a powerful union between architecture and acoustical performance. Utilizing fine 2mm grooves in a Class A fire rated, recycled and FSC certified wood panel this achieves up to an NRC=0.95 while maintaining the ambiance of the space with reflections at the highest frequencies.

Micro Perforated Acoustic Panels

Unliked to the traditional perforated acoustic panels micro-perforated acoustic panels offers and invisible solution for the decoration , the surface of the panel is drilled with numerous tiny micro-perforations which can provide and excellent acoustical performance, mainly to trap the noise and reduce reverberations time in the room. This system work on Helmholtz principle. Within micro perforation from 0.5mm to 1.0mm people won’t notice any hole on the decorative board, keeping the finishes and acoustic performance at place.

Curved Acoustic Panels

Designers and architects are interested in modern curved ceiling and walls. getting the curve finishes with wooden panels is not easy and hence required best design and technology driven products. Prenpanel limited develop curve panels based on groove/ perforated acoustic panel front. These panels depending on the groove / perforation finishes give acoustic performance at mid frequencies. Curve shaped not only give diversified 3Dimenions choices to designers but enhance acoustic performance with fluent shapes.

Fire Resistant Panels

The use of fire-resistant products indoors is extremely important for the health and safety of people indoors. Our company acts with this awareness and attaches importance to the production of fire resistant acoustic and decorative panels. We can provide fire resistance in all the raw materials we use and the applications made on them. We supply the products that comply with the fire standards determined by the world standards and regulations, both domestically and internationally, and then we offer these products to the use of our customers by making them suitable acoustic and decorative products for indoor spaces. The fire-retardant classes we provide are as follows.

Noise and Sound Reverberation

Class noise, recess noise, or lecture processing are all sources of noise at school. These voices are part of the school so noise cannot be blocked. However, weak acoustics increase the probability of being disturbed by sound problems by 32 percent. Therefore, it is possible to eliminate the noise problem at a high rate with acoustic regulation.

Research has revealed that approximately 30 percent of conversations within the school building are difficult to understand due to excessive noise and sound reverberation. Also, these sounds create big problems in terms of learning and focusing. The solution to eliminate these problems is acoustic regulations.